DPF FLUSH - Step 2

Concentrated flush for diesel particulate filters (DPF) in diesel engines. Provides a clean and regenerated DPF. Non-flammable, ash- and metal-free special concentrate that will not leave a residue.

Application

Use as step 2 of the treatment with the Xenum DPF cleaning kit. Add the full 1000ml into the DPF Flush sprayer tank. Use the adaptor to inject the cleaning fluid directly into the DPF. Let the engine turn at around 2000-2500 rpm during the atomisation of the liquid in the DPF.

Warning: It’s possible that some fluid may leak from the exhaust pipe. If this occurs, place a container under the exhaust pipe to collect any leakage and prevent stains on the ground. After the whole contents of the flushing liquid has been used, do a test-drive with the car (+/- 20 min) and frequently accelerate the engine (+3000 rpm) during the test-drive. This will ensure an optimum cleaning of the soot filter.

Available in

1 L – REF. 6049001

Technical Data Sheet
TDS
Material Safety Data Sheet
MSDS
magnifiercrossmenuchevron-down
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram